Laura Valaas

You are currently browsing the Current category.

Side Project

There is a small side project underway at poohsart.wordpress.com. It will most likely be compiled here at the end of the 100 days, but until then, pieces are being posted there.

Collaborating with miss RJ.

Add a comment

Boulder Mountain Tour

Kirsten & Father & Uncle Andy & I all participated in this year’s Boulder Mountain Tour, and all for our very first time. I have to say that it wasn’t quite the thrilling competitive event that I had always imagined my first BMT would be, but that was 100% my fault and was actually just fine. I was back with the red lantern carriers, or so it felt, but I had a very pleasant ski and cruised my way down the course. Post race, while we waited for the rest of the family members to cross the finish line, my C.A. & I scouted for evidence that the new Skadi Nordic Squishy Ski Tie was infiltrating the market. We met with surprising success. And I am convinced that the Skadi Ski Tie is going to be the next big thing in Nordic Skiing.

lost and found

lost and found

ski ties walking

ski ties walking

ski ties 2

ski ties 2

ski ties 1

ski ties 1

bus

bus

Add a comment

SIA Denver

If I’m learning anything at these trade shows, it’s that trade shows are a Big Deal. The amount of work that goes into putting together a trade show (or any convention, I imagine) is huge. Two days before the trade show starts all the crates get moved in, overhead signs set up and the booth building begins.

It’s a tangled mess of crates, boxes, packing material, real-sized erector sets, forklifts & people. Everyone has there own chaos to deal with and many of the booths are truly built and disassembled each trade show. An impressive change happens over those two days and, assuming I don’t get kicked out for trying to take pictures, I may have some to share of the final results since today is the first day of the SIA convention.

Skadi Nordic will be playing a supporting role in the Swix booth. And if you’ve seen any of our new products yet you know I really do mean supporting.

Add a comment

Skadi Nordic Ski Tie

skadi nordic ski tie squishedThe new Skadi Nordic ski tie is so amazing. I can’t even get over it. I’m so in love with it! It stays on better than any ski tie I’ve ever used. I know I’m biased but I think it truly is the perfect ski tie!

Add a comment

Devil’s Thumb Ranch

Hooray… we get to go to the SIA On-Snow Demo at Devil’s Thumb Ranch. I have to be in the Skadi Nordic booth during the demo hours 9am-4pm… that still gives me lots of time to go skiing right? right?!?!

So I guess what I’m saying is that anyone who wants to come do a midday stint as a Skadi Nordic rep at the On-Snow demo is more than welcome to come take my place for an hour or two…

Add a comment

New Year’s Weekend

Susan, Kirsten, Peter, & Laura Valaas

Kirsten Valaas

Chiwawa River

Peter Valaas

Grandma Yasuko's striped jello!

1 comment

Pad Printing

I am now a pad printer. true story.

Add a comment

Gelly Buddies!

Skadi Nordic is always looking for a better way to do things. It’s a trait too deeply ingrained in my psyche to overcome, no matter what the project. While we love the current BootBuddy material, and the precise control over our colors we have with it, we’re constantly exploring other options.

Sometimes we have really good ideas.

And sometimes our ideas are not-so-stellar.

BootBuddy Gellies Prototype

BootBuddy Gellies Prototype

BootBuddy Gelly -- still functional, lacking the aesthetics.

BootBuddy Gelly -- still functional, lacking the aesthetics.

Add a comment

Chocolate BootBuddy Poll


White Chocolate BootBuddy by Skadi Nordic

White Chocolate BootBuddy by Skadi Nordic

Milk Chocolate BootBuddy by Skadi Nordic

Milk Chocolate BootBuddy by Skadi Nordic

Dark Chocolate BootBuddy by Skadi Nordic

Dark Chocolate BootBuddy by Skadi Nordic

I don’t know what I’ve been thinking this whole time. Why would we make BootBuddies out of plastic when they could be made out of chocolate? Don’t worry, I plan to rectify this situation by the time the weather gets cool enough to safely ship chocolate products.

Add a comment

CNC Machining

My education in a lot of new fields this summer has been vast and fast. One of the sweetest parts of being in manufacturing is the toys! er, I mean tools.

Skadi Nordic is currently in production with the BootDock. The parts probably won’t make sense to you, because you haven’t had the opportunity to see the BootDock in action, but this is what was happening today in our machine shop…

Skadi Nordic BootDock Mold being cutThe BootDock will be produced from a (relatively) simple two-part mold. Press the two mold halves together, forming a BootDock shaped cavity, inject molten plastic, wait for a brief cooling cycle, pull the two halves of the mold apart and out pops a finished piece. This is the male side of the BootDock mold being cut by a CNC machine. It looks blurry in this photo because it’s water cooled and that’s the water washing away the heat and the metal shavings.

CNC machine cutting Skadi Nordic BootDock moldOne of the challenges I have had to face on an emotional level as I have gotten deeper into this venture is learning to let go of infinity! In my previous world, arcs could join at an angle approaching zero and edges could be infinitely sharp. In fact, the concept of a single point was a real thing and a line had zero width. I’ve since had to accept the constraints of the Real World, but what I’ve lost in abstract beauty I’ve gained in functional, physical beauty!

Skadi Nordic BootDock mold

The female half of the BootDock mold, ready to go to the polisher.

Once the aluminum block is finished at the CNC station it goes to the polisher. The polisher is the difference between a matte finish and a glossy finish!

Skadi Nordic BootDock mold

Skadi Nordic BootDock mold

By early next week the BootDock mold will be polished and plugged into the injection molding machine, several test iterations of the BootDock will be run and will be examined to insure that the mold indeed came out exactly how the engineers designed it. If any changes need to be made it’s back to the CNC machine (or just the polisher, depending on the extent of the adjustment).

Progress at Skadi Nordic is truckin’ away every day and, to me, the most exciting part of the process is what goes on behind the scenes to develop an idea into a product.

1 comment